Mechanical values and environment | |
---|---|
Housing material | PA6.6 gray |
Ambient temperature | 0 ... 55 °C |
Mounting method | Mounting rail 35mm according to DIN EN 60715 TH35 |
Number of read heads | max.1 |
Connection | Plug-in screw terminal |
Electrical connection ratings | |
Operating voltage DC | 20 ... 24 ... 28 V DC For use and operation as per the UL requirements, a power supply with the feature "for use in class 2 circuits" must be used. |
Current consumption | |
Without load | max.100 mA 65 mA |
LED indicator | |
Green | STATE LED operational |
Yellow | ACTIVE LED data carrier active |
Switching voltage | |
Ub-3 ... Ub V | |
0 ... 2 V | |
Switching current | |
Per output | - 30 ... +30 mA |
Type of output | Push-Pull |
Connection cross-section | 0,14 ... 2,5 mm? |
Resistance | For inputs (Reset,Skip) 4,5 k? |
Input voltage | |
15 ... Ub V DC | |
0 ... 2 V DC | |
Interface, bus | |
Data interface | 4 bit binary coded + strobe |
in combination withRead head CIT3ASX1N12STandData carrier CIS3AP10D05KH01K, CIS3AP10D05KH01K-P | |
Read distance | |
With center offset m=0 | 0 ... 3 ... 6,5 mm These values apply for the surface installation of the read head and the data carrier. |
With center offset m=0 | 0 ... 3 ... 6 mm These values apply for the surface installation of the read head and flush installation of the data carrier in iron. |
With center offset m=0 | 0 ... 3 ... 5 mm These values apply for the surface installation of the read head and flush installation of the data carrier in aluminum. |
Center offset | |
Read distance s = 3 mm | -2,5 ... 2,5 mm These values apply for the surface installation of the read head and the data carrier. |
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |