077910 | CIA3SX1R1G08 - фото 1 - id-p93676381

Характеристики и описание

Mechanical values and environment
Housing material	PA 6.6
Ambient temperature	0 ... 55 °C
Degree of protection	IP20
Mounting method	Mounting rail 35mm according to DIN EN 60715 TH35
Number of read heads	max.1
Connection	Plug-in screw terminals
Cable length
	RS232max.5 m
	RS422max.1000 m
Electrical connection ratings
Operating voltage DC	20 ... 24 ... 28 V DC All the electrical connections must either be isolated from the mains supply by a safety transformer according to IEC/EN 61558-2-6 with limited output voltage in the event of a fault, or by other equivalent isolation measures.
Current consumption	max.100 mA 65 mA
LED indicator
Green	STATE LED operational
Yellow	ACTIVE LED data carrier active
Connection cross-section	0,14 ... 2,5 mm?
Interface, bus
Data protocol	3964R via RS232/RS422
Data rate	9600 kbit/s 28800 kbit/s Can be selected via DIP switches
Miscellaneous
Additional feature
	Moisture test (not condensing) at +50°C and 80% rel. h
	Vibration - IEC60068-2-6 amplitude 1mm, 10-55Hz, 3 axes
	Shock - IEC60068-2-27 acceleration 30g, 6 shocks per axis, 11ms/half sinewave
in combination withRead head CIT3ASX1N12STandData carrier CIS3AP10D05KH01K, CIS3AP10D05KH01K-P
Read distance
With center offset m=0	0 ... 3 ... 6,5 mm These values apply for the surface installation of the read head and the data carrier.
With center offset m=0	0 ... 3 ... 6 mm These values apply for the surface installation of the read head and flush installation of the data carrier in iron.
With center offset m=0	0 ... 3 ... 5 mm These values apply for the surface installation of the read head and flush installation of the data carrier in aluminum.
Center offset
Read distance s = 3 mm	max.2,5 mm These values apply for the surface installation of the read head and the data carrier.
Write distance s = 3 mm	max.2 mm These values apply for the surface installation of the read head and the data carrier.
Write distance
With center offset m=0	0 ... 3 ... 6 mm These values apply for the surface installation of the read head and the data carrier.
With center offset m=0	0 ... 3 ... 5,5 mm These values apply for the surface installation of the read head and flush installation of the data carrier in iron.
With center offset m=0	0 ... 3 ... 4,5 mm These values apply for the surface installation of the read head and flush installation of the data carrier in aluminum.